VACCUM SLIDER

Product Details:

Bed Head Units Bed Head Panels are constructed from aluminum extusion profiles with round and smooth shape corners and shall be in different sizes length per each patient The unit shall have three phisically seprated compartments for low and extra low voltage electrical services and for medical gas services The unit shall provide a safe efficient means of delivering sercies to patients staff in both general and special care applications The unit shall have smooth curved surfaces no visible screws Installation of the unit shall provide a safe efficient means of delivering services to patients staff in both general and special care apllications The Unit shall have smooth curved surfaces no visible screws Instalation of the unit shall be carried out easily by aluminium rail brackets which allow simple horizontal and vertical alignment taking into account any wall high spots or unevenness Romoval of the covers for maintenance and pipeline conneections shall be easy The unit shall consist of a number of modular extrusions capable of being joined together to form a carcass to suit the particular apllication The unit shall have a backspin which shall incorporate an area which is for medical gas pipelines Segregation of services ie Extra low voltage 48 volts low voltage 500 volts and medical gases shall ve maintained througout Medical Gas and Electrical services shall be separated by inside unit Electric power feedings shall be 220V 50Hz The middle compartment of the unit shall be used for medical gas outlets and electrical services but gas services and electric services shall be phisically separated Upper and lower compartments of the unit shall be used for reading through indirect lights and necessary electrical wiring The lower cover of the unit shall have compartment for reading though light illuminations The upper cover of the unit shall have two openings for indirect light illumination thourgh a transparent sheet Both sides of the unit shall be closed by aluminium covers All cables and terminal blocks used inside the unit shall be non flammble type The unit shall be manufactured in accordance with international and European standards ISO 11197 and EN 793 for Medical Supply Units to HTM 2015 and to latest edition of IEE and NEC regulation The aluminium extucsion unit shall have an electrostatic powder paint finish on all external surfaces Unit shall be supplied pre piped pre wired and fully tested The minimum mounting height of the unit should ideally be 48 inches 4 from the finished floor level All removable covers of the unit shall be earthed Electric power feedings shall be 220V 50Hz The standard range of Patient Bed Head Unit shall be CE marked under the Medical Devices Directive 93 42 EEC Under this directive the specied products shall be dassied as Class lla Medical Devices We have diffrent types of medels and specification can vary for each model